CJ-170SQ-2 雙軸雙數控全自動切條機

 

CJ-170SQ-2 Two-axis Double-NC Automatic Slitting Machine

 

適用范圍：

 

application:

 

雙軸雙數控全自動切條機及直紋,45度斜紋卷布機適用于各種布料、無紡布,、帳篷,、雨傘布、泡棉,、皮革,、反光材料,、塑膠、紙張,、雙面膠,、絕緣膠布、醋酸布,、補強帶,、導電布、銅箔等材料各種寬度直條,，橫條及45度直斜條的雙軸同時裁切,。本機是服裝、箱包,、鞋帽,、服裝輔料、反光材料廠,、帳篷廠、雨傘廠,、膠布廠,、電子廠等行業的理想選擇。

 

Two-axis double-NC automatic sliver machine and straight line, 45 degree twill coil machine is suitable for cutting all kinds of fabric, non-woven fabric, tent, umbrella cloth, foam cotton, leather, reflective material, plastic, paper, double-sided adhesive, insulating rubber cloth, acetic acid cloth, reinforcing tape, conductive cloth, copper foil and other materials at the same time. This machine is an ideal choice for clothing, bags, shoes and hats, garment accessories, reflective materials factory, tent factory, umbrella factory, rubber cloth factory, electronic factory and other industries.

 

技術參數： Technical parameters:
布料幅寬： Fabric width:	1.7米(另有2.05米,、2.4米,、2.8米可選) 1.7 m (optional 2.05 m, 2.4 m, 2.8 m)	布料轉速： Cloth speed:	0-800(轉/分鐘) 0-800 (rev/min)
切布直徑： Cloth diameter:	200毫米，也可定制400毫米 200 mm or be customized to 400 mm	最小切條寬度： Minimum slice width:	2毫米 2 mm
刀片直徑： Blade diameter:	250毫米（也可定制到450毫米） 250 mm or be customized to 450 mm	刀片電機功率：Blade motor power:	4千瓦 4 kw
布軸直徑： Shaft diameter:	37毫米（可定制） 37mm (customizable)	布料電機功率：Distribution motor power:	4千瓦 4 kw
外形尺寸： size:	2.8米x1.5米x1.7米 2.8 m x 1.7m x 1.7 m	電壓： Voltage:	380V/220V可選 380V/220V optional

 

配備特點：

Feature:

1,、 兩支布料主軸以及兩把圓刀均使用無級變頻調速系統,，可做高低無級調速及正反轉切換控制。

1. Stepless frequency conversion speed regulation system is used for two spindles and three circular knives, which can be used for stepless speed regulation and forward and reverse switching control.

2,、 兩支布料主軸同時轉動,，兩把圓刀同時進刀裁切，效率是單軸切條機的兩倍,，并可省人工2名,。

2. Two cloth spindles rotate at the same time, two circular knives feed and cut at the same time, the efficiency is three times that of the single-axis sliver, and can save two people.

3、 兩把圓刀配有冷刀裝置,，不粘刀,。兩個刀座可獨立調節位置，不同直徑的刀片可同時使用,。

3. two round knives are equipped with a cold knife device, which does not stick to the knife. Two tool holders can independently adjust position, and blades of different diameters can be used at the same time.

4,、 臺板左右移位和進退刀均采用進口高精密步進系統及進口PLC控制切割寬度及進退刀切割和磨刀系統，配合進口精密滾珠絲桿及滑軌移位,，高壽命,，不易磨損,，使切割寬度的精度達到0.1mm，最窄切割寬度為2mm,，兩個刀片同時進刀切割時平行快速推進,，速度采用無極調速，可分段控制,，紙管容易切斷,，達到高精度快速切出高品質的產品。

4. Imported high precision stepping system and imported PLC are used to control the cutting width and the cutting and grinding system of the advance and retreat cutters. With imported precision ball screw and slideway shifting, the precision of the cutting width is 0.1 mm, the narrowest cutting width is 2 mm, and the two blades advance parallel and fast while cutting at the same time, and the speed is infinite. Speed regulation, segmented control, easy to cut off the paper tube, to achieve high precision and rapid cutting out of high quality products.

5,、 操作界面采用德國西門子高精度電腦觸摸屏,，所有操作，只需要一個畫面,，可同時設定六種分切寬度和次數,，并顯示實際切割次數，并設有手動/自動轉換轉換功能,。

5. The operation interface adopts Siemens high-precision computer touch screen. All operations require only one screen. Six cutting widths and times can be set simultaneously, and the actual cutting times can be displayed. The manual/automatic conversion function is also provided.

6,、 在手動功能下，設有十字搖桿手柄,，操作更加人性化,！更加便捷，移動速度更快,，移動的同時,，可以在觸摸屏上顯示移動的寬度，達到更加精準,。

6. Under the manual function, there is a cross rocker handle, which makes the operation more human-oriented! More convenient, faster moving speed, moving at the same time, can display the width of the movement on the touch screen, to achieve more accurate.

7,、 采用氣缸快速放料設計，快速一步到位,，夾緊不松動,。上料下料只須一個動作即可完成。

7. Adopt the design of quick discharge of cylinder, quick one-step in place, no loose clamping. Feeding and cutting can be accomplished in only one action.

8,、 電路采用各個獨立控制系統,，每條線都做有標號，可自動診斷機器故障問題,，維修簡單快捷,，不易出故障。

8. Each independent control system is adopted in the circuit. Each line is labeled. It can diagnose machine fault automatically. The maintenance is simple and fast, and it is not easy to break down.

9,、 夾布卡盤配有安全防護罩,，不傷人。電線配有工程塑料鏈條保護,，電線不容易折斷,，不容易老化,。

9. Cloth chuck is equipped with a safety shield, which does not hurt people. Wire is equipped with engineering plastic chain protection, wire is not easy to break, not easy to aging.